Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Tatsumoto, Hideki; Aso, Tomokazu; Otsu, Kiichi; Uehara, Toshiaki; Sakurayama, Hisashi; Kawakami, Yoshihiko; Kato, Takashi; Futakawa, Masatoshi
AIP Conference Proceedings 1218, p.297 - 304, 2010/04
Times Cited Count：2 Percentile：72.86(Thermodynamics)In JSNS, supercritical hydrogen at around 20 K and 1.5 MPa was selected as a moderator material. Three kinds of hydrogen moderators are installed to provide pulsed neutron beam with higher neutronic performance. A cryogenic hydrogen system, in which a hydrogen circulation system is cooled by a helium refrigerator system with the refrigerator capacity of 6.45 kW at 15.6 K, provides the supercritical hydrogen to the moderators and absorbs nuclear heating in the moderators. Through the off-beam commissioning, we have confirmed that the cryogenic hydrogen system can be cooled down to 18 K within 19 hours. The supercritical hydrogen with the mass flow rate of 190 g/s can be circulated at the rated condition. It is verified that the cryogenic hydrogen system is satisfied with the performance requirements. In May 2008, we have succeeded in providing the first cold neutron beam cooled by the cryogenic hydrogen system.
Tatsumoto, Hideki; Aso, Tomokazu; Otsu, Kiichi; Kato, Takashi; Futakawa, Masatoshi
AIP Conference Proceedings 1218, p.1154 - 1161, 2010/04
Times Cited Count：1 Percentile：56.3(Thermodynamics)Supercritical hydrogen with a pressure of 1.5 MPa and a temperature of 20 K has been selected as a moderator material in an intense spallation neutron source (JSNS), which is one of main experimental facilities in J-PARC. The cryogenic hydrogen system, in which a hydrogen circulation system is cooled by a helium refrigerator with the refrigeration power of 6.45 kW at 15.5 K, has been designed to provide the supercritical hydrogen to the moderator and to remove the nuclear heating generated there. In this study, we have developed a simulation code that predicts temperature behaviors in the hydrogen circulation system during its cool-down process. A cool-down process analyses have been performed, and an operational method for the cool-down process has been studied. The analytical results indicate that the hydrogen circulation system would be able to be cooled down to 18 K within 19 hours.
Tatsumoto, Hideki; Aso, Tomokazu; Otsu, Kiichi; Kato, Takashi; Futakawa, Masatoshi
AIP Conference Proceedings 1218, p.1162 - 1169, 2010/04
Times Cited Count：0 Percentile：0.04(Thermodynamics)In J-PARC, an intense spallation neutron source (JSNS) driven by a proton beam of 1 MW has selected supercritical hydrogen with a temperature of around 20 K and the pressure of 1.5 MPa as a moderator material. A hydrogen circulation system has been designed to provide supercritical hydrogen to the moderators and remove the nuclear heating there. It is important for the cooling design of the hydrogen circulation system to understand the pressure drops through the equipments. In this work, the pressure drop through each component was analyzed by using a CFD code, STAR-CD. The correlation of the pressure drops through the components that can describe the analytical results within 14 % differences has been derived. It is confirmed that the pressure drop in the hydrogen circulation system would be estimated to be 37 kPa for the circulation flow rate of 160 g/s by using the correlations derived here, and is sufficiently lower than the allowable pump head of 100 kPa.
Tatsumoto, Hideki; Aso, Tomokazu; Otsu, Kiichi; Uehara, Toshiaki; Sakurayama, Hisashi; Kawakami, Yoshihiko; Kato, Takashi; Hasegawa, Shoichi; Futakawa, Masatoshi
AIP Conference Proceedings 1218, p.289 - 296, 2010/04
Times Cited Count：2 Percentile：72.86(Thermodynamics)A cryogenic hydrogen system provides the supercritical hydrogen to the moderators and removes the nuclear heating at the moderators, which is estimated to 3.8 kW for a proton beam power of 1 MW. In order to mitigate pressure fluctuation caused by suddenly turning a proton beam on and off, we should design a pressure control system, which is composed of a heater as an active controller for thermal compensation and an accumulator as a passive volume controller. In December 2007, a 109 kW proton beam was injected to the JSNS. The pressure fluctuation behaviors have been studied for the 109 kW proton beam operation. As soon as the proton beam is injected, the accumulator starts to spontaneously constrict. The heater control can succeed in maintaining a constant heat load applied to the cryogenic hydrogen system. The pressure control system can reduce the pressure fluctuation below 5 kPa. We have confirmed that the pressure control system should be effective.
Nishimura, Arata*; Izumi, Yoshinobu*; Nishijima, Shigehiro*; Hemmi, Tsutomu; Koizumi, Norikiyo; Takeuchi, Takao*; Shikama, Tatsuo*
AIP Conference Proceedings 1219, p.127 - 134, 2010/04
Times Cited Count：1 Percentile：50.25(Materials Science, Multidisciplinary)A GFRP with cyanate ester resin was fabricated and neutron irradiation tests up to 1
10
n/m
of fast neutron with over 0.1 MeV energy were carried out in fission reactor. The fabrication process of cyanate ester GFRP was established and a collaboration network to perform investigations on irradiation effect of superconducting magnet materials was constructed. Three kinds of samples were fabricated. The first was CTD403 GFRP made by NIFS, the second was (cyanate ester + epoxy) GFRP provided by Toshiba, and the last was CTD403 GFRP made by Toshiba. The irradiation was carried out at JRR-3 in Japan Atomic Energy Agency using Rabbit capsules. After the irradiation, short beam tests were conducted at room temperature and 77 K and interlaminar shear strength (ILSS) was evaluated. The irradiation of 110
n/m increased ILSS a little but 110 n/m irradiation decreased ILSS to around 50 MPa. These tendencies were observed in all three kinds of GFRPs.
